DNSDOMAINNAME linux command manual
HOSTNAME(1) Linux Programmer's Manual HOSTNAME(1)
hostname - show or set the system's host name
domainname - show or set the system's NIS/YP domain name
dnsdomainname - show the system's DNS domain name
nisdomainname - show or set system's NIS/YP domain name
ypdomainname - show or set the system's NIS/YP domain name
hostname [-v] [-a] [--alias] [-d] [--domain] [-f] [--fqdn] [-i] [--ip-
address] [--long] [-s] [--short] [-y] [--yp] [--nis] [-n] [--node]
hostname [-v] [-F filename] [--file filename] [hostname]
domainname [-v] [-F filename] [--file filename] [name]
nodename [-v] [-F filename] [--file filename] [name]
hostname [-v] [-h] [--help] [-V] [--version]
Hostname is the program that is used to either set or display the cur-
rent host, domain or node name of the system. These names are used by
many of the networking programs to identify the machine. The domain
name is also used by NIS/YP.
When called without any arguments, the program displays the current
hostname will print the name of the system as returned by the gethost-
domainname, nisdomainname, ypdomainname will print the name of the
system as returned by the getdomainname(2) function. This is also
known as the YP/NIS domain name of the system.
dnsdomainname will print the domain part of the FQDN (Fully Qualified
Domain Name). The complete FQDN of the system is returned with host-
When called with one argument or with the --file option, the commands
set the host name, the NIS/YP domain name or the node name.
Note, that only the super-user can change the names.
It is not possible to set the FQDN or the DNS domain name with the
dnsdomainname command (see THE FQDN below).
The host name is usually set once at system startup in
/etc/rc.d/rc.inet1 or /etc/init.d/boot (normally by reading the con-
tents of a file which contains the host name, e.g. /etc/hostname).
You can't change the FQDN (as returned by hostname --fqdn) or the DNS
domain name (as returned by dnsdomainname) with this command. The FQDN
of the system is the name that the resolver(3) returns for the host
Technically: The FQDN is the name gethostbyname(2) returns for the
host name returned by gethostname(2). The DNS domain name is the part
after the first dot.
Therefore it depends on the configuration (usually in /etc/host.conf)
how you can change it. Usually (if the hosts file is parsed before DNS
or NIS) you can change it in /etc/hosts.
Display the alias name of the host (if used).
Display the name of the DNS domain. Don't use the command
domainname to get the DNS domain name because it will show the
NIS domain name and not the DNS domain name. Use dnsdomainname
-F, --file filename
Read the host name from the specified file. Comments (lines
starting with a '#') are ignored.
-f, --fqdn, --long
Display the FQDN (Fully Qualified Domain Name). A FQDN consists
of a short host name and the DNS domain name. Unless you are
using bind or NIS for host lookups you can change the FQDN and
the DNS domain name (which is part of the FQDN) in the
Print a usage message and exit.
Display the IP address(es) of the host.
Display the short host name. This is the host name cut at the
Print version information on standard output and exit success-
Be verbose and tell what's going on.
-y, --yp, --nis
Display the NIS domain name. If a parameter is given (or --file
name ) then root can also set a new NIS domain.
Bernd Eckenfels, (NIS and manpage).
Steve Whitehouse, (DECnet support and manpage).
net-tools 28 Jan 1996 HOSTNAME(1)