GUNZIP linux command manual
gzip, gunzip, zcat - compress or expand files
gzip [ -acdfhlLnNrtvV19 ] [-S suffix] [ name ... ]
gunzip [ -acfhlLnNrtvV ] [-S suffix] [ name ... ]
zcat [ -fhLV ] [ name ... ]
Gzip reduces the size of the named files using Lempel-Ziv coding
(LZ77). Whenever possible, each file is replaced by one with the
extension .gz, while keeping the same ownership modes, access and mod-
ification times. (The default extension is -gz for VMS, z for MSDOS,
OS/2 FAT, Windows NT FAT and Atari.) If no files are specified, or if
a file name is "-", the standard input is compressed to the standard
output. Gzip will only attempt to compress regular files. In partic-
ular, it will ignore symbolic links.
If the compressed file name is too long for its file system, gzip
truncates it. Gzip attempts to truncate only the parts of the file
name longer than 3 characters. (A part is delimited by dots.) If the
name consists of small parts only, the longest parts are truncated.
For example, if file names are limited to 14 characters,
gzip.msdos.exe is compressed to gzi.msd.exe.gz. Names are not trun-
cated on systems which do not have a limit on file name length.
By default, gzip keeps the original file name and timestamp in the
compressed file. These are used when decompressing the file with the
-N option. This is useful when the compressed file name was truncated
or when the time stamp was not preserved after a file transfer.
Compressed files can be restored to their original form using gzip -d
or gunzip or zcat. If the original name saved in the compressed file
is not suitable for its file system, a new name is constructed from
the original one to make it legal.
gunzip takes a list of files on its command line and replaces each
file whose name ends with .gz, -gz, .z, -z, _z or .Z and which begins
with the correct magic number with an uncompressed file without the
original extension. gunzip also recognizes the special extensions
.tgz and .taz as shorthands for .tar.gz and .tar.Z respectively. When
compressing, gzip uses the .tgz extension if necessary instead of
truncating a file with a .tar extension.
gunzip can currently decompress files created by gzip, zip, compress,
compress -H or pack. The detection of the input format is automatic.
When using the first two formats, gunzip checks a 32 bit CRC. For
pack, gunzip checks the uncompressed length. The standard compress
format was not designed to allow consistency checks. However gunzip is
sometimes able to detect a bad .Z file. If you get an error when
uncompressing a .Z file, do not assume that the .Z file is correct
simply because the standard uncompress does not complain. This gener-
ally means that the standard uncompress does not check its input, and
happily generates garbage output. The SCO compress -H format (lzh
compression method) does not include a CRC but also allows some con-
Files created by zip can be uncompressed by gzip only if they have a
single member compressed with the 'deflation' method. This feature is
only intended to help conversion of tar.zip files to the tar.gz for-
mat. To extract zip files with several members, use unzip instead of
zcat is identical to gunzip -c. (On some systems, zcat may be
installed as gzcat to preserve the original link to compress.) zcat
uncompresses either a list of files on the command line or its stan-
dard input and writes the uncompressed data on standard output. zcat
will uncompress files that have the correct magic number whether they
have a .gz suffix or not.
Gzip uses the Lempel-Ziv algorithm used in zip and PKZIP. The amount
of compression obtained depends on the size of the input and the dis-
tribution of common substrings. Typically, text such as source code
or English is reduced by 60-70%. Compression is generally much better
than that achieved by LZW (as used in compress), Huffman coding (as
used in pack), or adaptive Huffman coding (compact).
Compression is always performed, even if the compressed file is
slightly larger than the original. The worst case expansion is a few
bytes for the gzip file header, plus 5 bytes every 32K block, or an
expansion ratio of 0.015% for large files. Note that the actual number
of used disk blocks almost never increases. gzip preserves the mode,
ownership and timestamps of files when compressing or decompressing.
Ascii text mode: convert end-of-lines using local conventions.
This option is supported only on some non-Unix systems. For
MSDOS, CR LF is converted to LF when compressing, and LF is
converted to CR LF when decompressing.
-c --stdout --to-stdout
Write output on standard output; keep original files unchanged.
If there are several input files, the output consists of a
sequence of independently compressed members. To obtain better
compression, concatenate all input files before compressing
-d --decompress --uncompress
Force compression or decompression even if the file has multi-
ple links or the corresponding file already exists, or if the
compressed data is read from or written to a terminal. If the
input data is not in a format recognized by gzip, and if the
option --stdout is also given, copy the input data without
change to the standard ouput: let zcat behave as cat. If -f is
not given, and when not running in the background, gzip prompts
to verify whether an existing file should be overwritten.
Display a help screen and quit.
For each compressed file, list the following fields:
compressed size: size of the compressed file
uncompressed size: size of the uncompressed file
ratio: compression ratio (0.0% if unknown)
uncompressed_name: name of the uncompressed file
The uncompressed size is given as -1 for files not in gzip for-
mat, such as compressed .Z files. To get the uncompressed size
for such a file, you can use:
zcat file.Z | wc -c
In combination with the --verbose option, the following fields
are also displayed:
method: compression method
crc: the 32-bit CRC of the uncompressed data
date & time: time stamp for the uncompressed file
The compression methods currently supported are deflate, com-
press, lzh (SCO compress -H) and pack. The crc is given as
ffffffff for a file not in gzip format.
With --name, the uncompressed name, date and time are those
stored within the compress file if present.
With --verbose, the size totals and compression ratio for all
files is also displayed, unless some sizes are unknown. With
--quiet, the title and totals lines are not displayed.
Display the gzip license and quit.
When compressing, do not save the original file name and time
stamp by default. (The original name is always saved if the
name had to be truncated.) When decompressing, do not restore
the original file name if present (remove only the gzip suffix
from the compressed file name) and do not restore the original
time stamp if present (copy it from the compressed file). This
option is the default when decompressing.
When compressing, always save the original file name and time
stamp; this is the default. When decompressing, restore the
original file name and time stamp if present. This option is
useful on systems which have a limit on file name length or
when the time stamp has been lost after a file transfer.
Suppress all warnings.
Travel the directory structure recursively. If any of the file
names specified on the command line are directories, gzip will
descend into the directory and compress all the files it finds
there (or decompress them in the case of gunzip ).
-S .suf --suffix .suf
Use suffix .suf instead of .gz. Any suffix can be given, but
suffixes other than .z and .gz should be avoided to avoid con-
fusion when files are transferred to other systems. A null
suffix forces gunzip to try decompression on all given files
regardless of suffix, as in:
gunzip -S "" * (*.* for MSDOS)
Previous versions of gzip used the .z suffix. This was changed
to avoid a conflict with pack(1).
Test. Check the compressed file integrity.
Verbose. Display the name and percentage reduction for each
file compressed or decompressed.
Version. Display the version number and compilation options
-# --fast --best
Regulate the speed of compression using the specified digit #,
where -1 or --fast indicates the fastest compression method
(less compression) and -9 or --best indicates the slowest com-
pression method (best compression). The default compression
level is -6 (that is, biased towards high compression at
expense of speed).
Multiple compressed files can be concatenated. In this case, gunzip
will extract all members at once. For example:
gzip -c file1 > foo.gz
gzip -c file2 >> foo.gz
gunzip -c foo
is equivalent to
cat file1 file2
In case of damage to one member of a .gz file, other members can still
be recovered (if the damaged member is removed). However, you can get
better compression by compressing all members at once:
cat file1 file2 | gzip > foo.gz
compresses better than
gzip -c file1 file2 > foo.gz
If you want to recompress concatenated files to get better compres-
gzip -cd old.gz | gzip > new.gz
If a compressed file consists of several members, the uncompressed
size and CRC reported by the --list option applies to the last member
only. If you need the uncompressed size for all members, you can use:
gzip -cd file.gz | wc -c
If you wish to create a single archive file with multiple members so
that members can later be extracted independently, use an archiver
such as tar or zip. GNU tar supports the -z option to invoke gzip
transparently. gzip is designed as a complement to tar, not as a
The environment variable GZIP can hold a set of default options for
gzip. These options are interpreted first and can be overwritten by
explicit command line parameters. For example:
for sh: GZIP="-8v --name"; export GZIP
for csh: setenv GZIP "-8v --name"
for MSDOS: set GZIP=-8v --name
On Vax/VMS, the name of the environment variable is GZIP_OPT, to avoid
a conflict with the symbol set for invocation of the program.
znew(1), zcmp(1), zmore(1), zforce(1), gzexe(1), zip(1), unzip(1),
compress(1), pack(1), compact(1)
The gzip file format is specified in P. Deutsch, GZIP file format
specification version 4.3, ,
Internet RFC 1952 (May 1996). The zip deflation format is specified
in P. Deutsch, DEFLATE Compressed Data Format Specification version
1.3, , Internet RFC 1951 (May
Exit status is normally 0; if an error occurs, exit status is 1. If a
warning occurs, exit status is 2.
Usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
Invalid options were specified on the command line.
file: not in gzip format
The file specified to gunzip has not been compressed.
file: Corrupt input. Use zcat to recover some data.
The compressed file has been damaged. The data up to the point
of failure can be recovered using
zcat file > recover
file: compressed with xx bits, can only handle yy bits
File was compressed (using LZW) by a program that could deal
with more bits than the decompress code on this machine.
Recompress the file with gzip, which compresses better and uses
file: already has .gz suffix -- no change
The file is assumed to be already compressed. Rename the file
and try again.
file already exists; do you wish to overwrite (y or n)?
Respond "y" if you want the output file to be replaced; "n" if
gunzip: corrupt input
A SIGSEGV violation was detected which usually means that the
input file has been corrupted.
xx.x% Percentage of the input saved by compression.
(Relevant only for -v and -l.)
-- not a regular file or directory: ignored
When the input file is not a regular file or directory, (e.g. a
symbolic link, socket, FIFO, device file), it is left unal-
-- has xx other links: unchanged
The input file has links; it is left unchanged. See ln(1) for
more information. Use the -f flag to force compression of mul-
When writing compressed data to a tape, it is generally necessary to
pad the output with zeroes up to a block boundary. When the data is
read and the whole block is passed to gunzip for decompression, gunzip
detects that there is extra trailing garbage after the compressed data
and emits a warning by default. You have to use the --quiet option to
suppress the warning. This option can be set in the GZIP environment
variable as in:
for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0
In the above example, gzip is invoked implicitly by the -z option of
GNU tar. Make sure that the same block size (-b option of tar) is used
for reading and writing compressed data on tapes. (This example
assumes you are using the GNU version of tar.)
The gzip format represents the the input size modulo 2^32, so the
--list option reports incorrect uncompressed sizes and compression
ratios for uncompressed files 4 GB and larger. To work around this
problem, you can use the following command to discover a large uncom-
pressed file's true size:
zcat file.gz | wc -c
The --list option reports sizes as -1 and crc as ffffffff if the com-
pressed file is on a non seekable media.
In some rare cases, the --best option gives worse compression than the
default compression level (-6). On some highly redundant files, com-
press compresses better than gzip.
Copyright (C) 1998, 1999, 2001 Free Software Foundation, Inc.
Copyright (C) 1992, 1993 Jean-loup Gailly
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.
Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a per-
mission notice identical to this one.
Permission is granted to copy and distribute translations of this man-
ual into another language, under the above conditions for modified
versions, except that this permission notice may be stated in a trans-
lation approved by the Foundation.