SSH-KEYSCAN linux command manual

SSH-KEYSCAN(1)               BSD General Commands Manual           SSH-KEYSCAN(1)

     ssh-keyscan - gather ssh public keys

     ssh-keyscan [-v46] [-p port] [-T timeout] [-t type] [-f file]
                 [host | addrlist namelist] [...]

     ssh-keyscan is a utility for gathering the public ssh host keys of a
     number of hosts.  It was designed to aid in building and verifying
     ssh_known_hosts files.  ssh-keyscan provides a minimal interface suit-
     able for use by shell and perl scripts.

     ssh-keyscan uses non-blocking socket I/O to contact as many hosts as
     possible in parallel, so it is very efficient.  The keys from a domain
     of 1,000 hosts can be collected in tens of seconds, even when some of
     those hosts are down or do not run ssh.  For scanning, one does not need
     login access to the machines that are being scanned, nor does the scan-
     ning process involve any encryption.

     The options are as follows:

     -p port
             Port to connect to on the remote host.

     -T timeout
             Set the timeout for connection attempts.  If timeout seconds
             have elapsed since a connection was initiated to a host or since
             the last time anything was read from that host, then the connec-
             tion is closed and the host in question considered unavailable.
             Default is 5 seconds.

     -t type
             Specifies the type of the key to fetch from the scanned hosts.
             The possible values are "rsa1" for protocol version 1 and "rsa"
             or "dsa" for protocol version 2.  Multiple values may be speci-
             fied by separating them with commas.  The default is "rsa1".

     -f filename
             Read hosts or addrlist namelist pairs from this file, one per
             line.  If - is supplied instead of a filename, ssh-keyscan will
             read hosts or addrlist namelist pairs from the standard input.

     -v      Verbose mode.  Causes ssh-keyscan to print debugging messages
             about its progress.

     -4      Forces ssh-keyscan to use IPv4 addresses only.

     -6      Forces ssh-keyscan to use IPv6 addresses only.

     If a ssh_known_hosts file is constructed using ssh-keyscan without veri-
     fying the keys, users will be vulnerable to attacks.  On the other hand,
     if the security model allows such a risk, ssh-keyscan can help in the
     detection of tampered keyfiles or man in the middle attacks which have
     begun after the ssh_known_hosts file was created.

     Print the rsa1 host key for machine hostname:

     $ ssh-keyscan hostname

     Find all hosts from the file ssh_hosts which have new or different keys
     from those in the sorted file ssh_known_hosts:

     $ ssh-keyscan -t rsa,dsa -f ssh_hosts | \
             sort -u - ssh_known_hosts | diff ssh_known_hosts -

     Input format:,,name,,n,,

     Output format for rsa1 keys:

     host-or-namelist bits exponent modulus

     Output format for rsa and dsa keys:

     host-or-namelist keytype base64-encoded-key

     Where keytype is either "ssh-rsa" or "ssh-dsa".


     It generates "Connection closed by remote host" messages on the consoles
     of all the machines it scans if the server is older than version 2.9.
     This is because it opens a connection to the ssh port, reads the public
     key, and drops the connection as soon as it gets the key.

     ssh(1), sshd(8)

     David Mazieres  wrote the initial version, and Wayne
     Davison  added support for protocol ver-
     sion 2.

BSD                            January 1, 1996                            BSD